EOT Crane Brakes

Product Details:

We are leading manufacturer of AC Solenoid Brake that are suitable for AC supply up to 400 to 440 volts, and are available for a wide range of drum sizes from 100 mm to 380mm Dia. We stand in the midst of prominent electromagnetic brakes suppliers based in India.

Since these brakes are in normally closed position, the release of the Brake shoes is affected by energizing the electro magnetic coil, which overcomes the spring force and the shoes are moved clear off the drum by lever/arm linkage system so that the drum is free to rotate without any friction. When the power in given to the Electro Magnetic coil the coil gets energized and in turn pulls the plunger down.

The plunger in turn operates the arm of the brakes and the brake opens. The design of the brake is such that as the lining keeps wearing out due to normal operation of the brake, adjusts itself on its own to achieve the rated toque. When specified, brake drum or drum coupling both pin bush type and flexible geared type can be supplied along with the brakes.

Constructional Features:

• Special Constructional features such as those listed below account for exceptionally long mechanical life of the brakes
• Neoprene shock absorber prevents link pin breakage and increases the life of the solenoid
• Hardened steel lever and spring gland reduces wear at the pins and all other points of contact
• Cast iron wheel The physical properties of the iron minmize the tendency of the wheel to deposit metal particies in the lining which could result in serious scoring of the wheel
• Spring pins the tight gripping spring pins insure against the loss of pins due to shock
• Inexpensive lining replacement Linings attached to shoes by removable flat head groove pins
• Fewer joints the shoe is actually a part of the shoe lever and not separate from it. This makes fewer mechanical joints and keeps wear points at minimum
• Solenoid The solenoid coil can be removed without disturbing the brake adjustment. solenoid loading is designed to reduce wear

Specifications:

Product Details:

We are leading manufacturer of Crane Hoist Brake that are suitable for AC supply up to 400 to 440 volts, and are available for a wide range of drum sizes from 100 mm to 380mm Dia. We stand in the midst of prominent electromagnetic brakes suppliers based in India.

Since these brakes are in normally closed position, the release of the Brake shoes is affected by energizing the electro magnetic coil, which overcomes the spring force and the shoes are moved clear off the drum by lever/arm linkage system so that the drum is free to rotate without any friction. When the power in given to the Electro Magnetic coil the coil gets energized and in turn pulls the plunger down.

The plunger in turn operates the arm of the brakes and the brake opens. The design of the brake is such that as the lining keeps wearing out due to normal operation of the brake, adjusts itself on its own to achieve the rated toque. When specified, brake drum or drum coupling both pin bush type and flexible geared type can be supplied along with the brakes.

Constructional Features:

• Special constructional features such as those listed below account for exceptionally long mechanical life of the brakes.
• Neoprene shock absorber prevents link pin breakage and increases the life of the solenoid
• Hardened steel lever and spring gland reduces wear at the pins and all other points of contact
• Cast iron wheel the physical properties of the iron minimize the tendency of the wheel to deposit metal particles in the lining which couldresult in serious scoring of the wheel
• Spring pins: the tight gripping spring pins insure against the loss of pins due to shock
• Inexpensive Lining replacement: Linings attached to shoes by removable flat head groove pins
• Fewer joints: The shoe is actually a part of the shoe lever and not separate from it. This makes fewer mechanical joints and keeps wear points at minimum
• Solenoid: The Solenoid coil can be removed without disturbing the brake adjustment solenoid loading is designed to reduce wear

 

Adjustments:

• adjustments for torque and lining wear are conveniently and quickly made. Braking torque and living wear adjustments are made at the top of the brake. A set screw and locking nut located on the top of the solenoid frame provide adjustment for equalizing clearance between the brake shoes to prevent dragging when the brake is released

 

Applications:

• Typical application include conveyors, hoisting equipment, machine tools, printing presses, small cranes, over head doors, Vacuum moulding machines etc

Product Details:

We are leading manufacturer & Exporter of AC Electro Magnetic Brake in India. Our Brake drums & Gear Coupling are made from premium quality materials which offer strength and durability to them.

These brake drums are specially designed and guarantees dimensional accuracy which is inevitable for precise operations.

Specifications:

Product Details:

We are leading manufacturer of AC Solenoid Magnetic Brake that are suitable for AC supply up to 400 to 440 volts, and are available for a wide range of drum sizes from 100 mm to 380mm Dia. We stand in the midst of prominent electromagnetic brakes suppliers based in India.

Since these brakes are in normally closed position, the release of the Brake shoes is affected by energizing the electro magnetic coil, which overcomes the spring force and the shoes are moved clear off the drum by lever/arm linkage system so that the drum is free to rotate without any friction. When the power in given to the Electro Magnetic coil the coil gets energized and in turn pulls the plunger down.

The plunger in turn operates the arm of the brakes and the brake opens. The design of the brake is such that as the lining keeps wearing out due to normal operation of the brake, adjusts itself on its own to achieve the rated toque. When specified, brake drum or drum coupling both pin bush type and flexible geared type can be supplied along with the brakes.

Features:

• Durable
• Sturdy
• Accurate dimensions

 

Constructional Features:

• Special constructional features such as those listed below account for exceptionally long mechanical life of the brakes.
• Neoprene shock absorber prevents link pin breakage and increases the life of the solenoid
• Hardened steel lever and spring gland reduces wear at the pins and all other points of contact
• Cast iron wheel the physical properties of the iron minimize the tendency of the wheel to deposit metal particles in the lining which couldresult in serious scoring of the wheel
• Spring pins: the tight gripping spring pins insure against the loss of pins due to shock
• Inexpensive Lining replacement: Linings attached to shoes by removable flat head groove pins
• Fewer joints: The shoe is actually a part of the shoe lever and not separate from it. This makes fewer mechanical joints and keeps wear points at minimum
• Solenoid: The Solenoid coil can be removed without disturbing the brake adjustment solenoid loading is designed to reduce wear

 

Adjustments:

• adjustments for torque and lining wear are conveniently and quickly made. Braking torque and living wear adjustments are made at the top of the brake. A set screw and locking nut located on the top of the solenoid frame provide adjustment for equalizing clearance between the brake shoes to prevent dragging when the brake is released

 

Applications:

• Typical application include conveyors, hoisting equipment, machine tools, printing presses, small cranes, over head doors, Vacuum moulding machines etc

 

Sizes Available:

• 4", 5.5", 7", 10", etc.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/A
• Port of Dispatch: KANDLA , NAHVA SEVA
• Production Capacity: 10.000/WEEK
• Delivery Time: 1 week

Product Details:

Our company is well known for the manufacturing and exporting of E & I Plate for Electromagnetic Disc Brake. These E & I Plate for Electromagnetic Disc Brake are making using high quality raw material, which is sourced from trustworthy vendors of the market.

A.C. Disc Brakes (Fail Safe):

• Very Compact and modern in design foundation is not necessary as they are directly mounted on non driving end shaft of the motor. It consist of liner plates Brake disc with square hole at the center. One corresponding piece of square hub is supplied with the brake. This hub is keyed to the motor shaft and the liner plate is free on this hub normally line plate is gripped between two discs with the help of spring pressure. They work on 230/115 V AC when the current is supplied to the brake, one disc is attracted by electromagnet against spring pressure and the liner plate is released. Thus the brake is off. Once the brake is set it dose not required adjustments or maintenance. When the liner plates wears with the use then only air gap is to be maintained periodically. An arrangement to release the brake manually could be provided on request.

Fail Safe Brake for Brake Motors:

• Brake motor is combination of three phase squirrel cage induction motor with electro magnetic disc brake AC. When power is switched off with ordinary motor, the rotating parts will stopped after some time but if Brake motor is used, rotating mass will stop instantaneously. All brakes are mounted at non driving end of motor. Braking disc is mounted directly on motor shaft. Brakes are directly acting no lever or links are required. Friction liner plate is only wearing part and this is easily replaceable

Applications:

• Used in machine tools, Hydro extractors, coil winding machines, Wire drawing machines, Rubber mixing mills rolling mills, Printing machines and in many other industries such as a cement mining, sugar, Textile, material handling etc, In case of power failure in machines like hoists, Cranes, Winches, Elevators, etc. application of brake is a must. We offer AC type brakes, Called fail safe brake, as in case of power failure, these brakes apply mechanically.

Specifications:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/A
• Port of Dispatch: KANDLA , NAHVA SEVA
• Production Capacity: 10.000/WEEK
• Delivery Time: 1 week

Product Details:

Our company is well known for the manufacturing and exporting of I-plate for Disc Brake. These I-Plate For Disc Brake are making using high quality raw material, which is sourced from trustworthy vendors of the market.

Features:

• Smooth finish
• Rust proof
• Optimum performance

Specifications:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/A
• Port of Dispatch: KANDLA , NAHVA SEVA
• Production Capacity: 10.000/WEEK
• Delivery Time: 1 week

Product Details:

Our company is well known for the manufacturing and exporting of E Plate For Disc Brake. These E plate for Disc Brake are making using high quality raw material, which is sourced from trustworthy vendors of the market.

Features:

• Smooth finish
• Rust proof
• Optimum performance

A.C. Disc Brakes (Fail Safe):

• Very Compact and modern in design foundation is not necessary as they are directly mounted on non driving end shaft of the motor. It consist of liner plates Brake disc with square hole at the center. One corresponding piece of square hub is supplied with the brake. This hub is keyed to the motor shaft and the liner plate is free on this hub normally line plate is gripped between two discs with the help of spring pressure. They work on 230/115 V AC when the current is supplied to the brake, one disc is attracted by electromagnet against spring pressure and the liner plate is released. Thus the brake is off. Once the brake is set it dose not required adjustments or maintenance. When the liner plates wears with the use then only air gap is to be maintained periodically. An arrangement to release the brake manually could be provided on request.

Specifications:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/A
• Port of Dispatch: KANDLA , NAHVA SEVA
• Production Capacity: 10.000/WEEK
• Delivery Time: 1 week

Product Details:

We are one of the leading manufacturer and exporter of EOT Crane AC Brake.

Specifications:

Product Details:

We are one of the leading manufacturer and exporter of EOT Magnetic Brakes.

Applications:

• Used in machine tools, hydro extractors, Coil winding machines, wire drawing machines, Rubber mixing mills rolling mills, printing machines and in many other industries such as a cement mining, sugar, Textile, material handling etc. In case of power failure in machines like hoists, cranes, winches, elevators, etc. application of brake is a must. We offer AC type brakes, Called fail safe brake, as in case of power failure, these brakes apply mechanically.

Specifications:

Product Details:

We are Leading Manufacturer & Exporter of EOT Crane Thruster Brake. Thruster Brakes is a device used to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a per-stressed comprising spring. The shoes press on the rotating brake drum retarding its speed and finally stop it. The releasing of the brake drum and compressing of the spring is done by thruster.

We are manufacturer of superior quality range of AC and DC Fail Safe Brake. We regularly interact with the customers and ensure that their needs are fulfilled in the way they desire. Normally liner plate is gripped between two discs with the help of spring pressure. Our A.C & D.C. fail safe disc brakes are manufactured to International standards and are with high operating frequency & reliability.

We are leading manufacturer of AC Solenoid Brake that are suitable for AC supply up to 400 to 440 volts and are available for a wide range of drum sizes from 100 mm to 380mm Dia. We stand in the midst of prominent electromagnetic brakes suppliers based in India.

Specifications:

Product Details:

Our company is well known for the manufacturing and exporting of Electromagnetic Brake. These Electromagnetic Brake are making using high quality raw material, which is sourced from trustworthy vendors of the market.

Product Details:

• Offering Shoe Brake, Solenoid Brake, Drum Brake. We make Electro-magnetic, AC / DC Solenoid operated Shoe Type, Spring loaded, fail safe Brake.
• Standard working Voltages for DC Brake: 24, 110, 190V DC.
• Suitable for drum diameter: 100, 150, 200, 250, 300, 400 mm.
• Available with: Brake Drum, flexible brake drum coupling, geared coupling, geared brake drum coupling.
• Applications: Cranes, Lifts, Conveyors, Winches, Hoists, Material Handling Equipments, Dam Gates etc.

Technical Specifications:

Product Details:

We are leading Manufacturer of the Electro Hydraulic Thruster Brake. 

Specifications:

Additional Information:

• Item Code: MDT
• Delivery Time: READY STOCK

Product Details:

We are Leading Manufacturer & exporter of Thrustor Operated Brake. Thruster Brakes is a device used to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a per-stressed comprising spring. 

Specifications:

Product Details:

CMK Electro Power Pvt Ltd is the leading manufacturer of Thruster Brakes Our mill duty Thruster Brakes are suitable for 400/440 Volts, 3 Phase A.C. supply for a wide range of drum sizes, from 100mm to 600 mm dia. Higher sizes can also be supplied against specific requirements. The brake is applied by the tension of the compressed springs mounted vertically between the thruster and brake lever. The thruster rods are connected with the brake by means of an angle lever. As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel (Brake Drum) is retracted.

The brake lever at the thruster begins to move when the first lever reaches the stop on the brake base member The thruster and the brake are so adjusted as to reserve about 1/3 of the stroke for compensation of the wear of the brake linings.

Thruster brakes are suitable for:

• Easy installation & maintenance
• Reverse action version available
• Self adjusting lining wear mechanism
• Hydraulic / pneumatic actuator
• Gentle action, simple control, high performance.

Specifications:

Product Details:

CMK Electro Power Pvt Ltd is the leading manufacturer of Crane Brake. Electro hydraulic Thruster Brake. Magnetic brake, Shoe Brake,Solenoid brake etc. Our mill duty Thruster Brakes are suitable for 400/440 Volts, 3 Phase A.C. supply for a wide range of drum sizes, from 100mm to 600 mm dia. Higher sizes can also be supplied against specific requirements.

The brake is applied by the tension of the compressed springs mounted vertically between the thruster and brake lever. The thruster rods are connected with the brake by means of an angle lever. As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel (Brake Drum) is retracted. The brake lever at the thruster begins to move when the first lever reaches the stop on the brake base member The thruster and the brake are so adjusted as to reserve about 1/3 of the stroke for compensation of the wear of the brake linings.

Specifications:

Product Details:

We are one of the leading manufacturer and exporter of Hydraulic Thrusters.

Application: 

• EDT Cranes, Material Handling Equipment's, Winches, Lifting device, Machinery, Steel Mill, Heavy Lifting equipment's, Port Cranes, Goliath cranes, Hoist, Tower Cranes, Cement Industrial, Heavy Machinery. 

Our Customers: 

• EOT Crane Manufacturer, Steel Manufacturers, Heavy Industries, Foundries, Mines, Paper and Pulp producers, Cement Industry, Smelters, Steel Mills, Power Houses, Shipyard, Ports, Railways and all Engineering Industries 

Technical Specifications:

Product Details:

We are leading manufacturer & Exporter of Electro Hydraulic Thruster.We are manufacturer of wide range of electro hydraulic thruster. Electro hydraulic Thruster is a device which develops linear thrust required to operate the required mechanism. The input to the device is three phase supply.

The thrusters are widely used to actuate thruster shoe brakes, commonly used in material handling machines & equipments. Thruster in various models available 15 Kg to 295 Kg. in stroke lengths of 51,76 & 127 mm.

Specifications:

Product Details:

We are offering our customers an excellent quality range of Electromagnetic Disc Brake Liner. These are manufactured from qualitative range of raw materials, which is quality checked by our team of experienced professionals. We offer these Brake liner at most competitive prices.

Features:

• Longer service life
• Lightweight
• Excellent in work
• Easy to use
• Robust construction
• Low maintenance

Specifications:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/A
• Port of Dispatch: KANDLA , NAHVA SEVA
• Production Capacity: 10.000/WEEK
• Delivery Time: 1 week

Product Details:

Having an in-depth knowledge of the market, we have been able to attain a prestigious position in the market by providing an excellent range of Electromagnetic Disc Brake Coil. The products come under this category are Solenoid Brakes Coils, DC Brakes Coils, Industrial DC Brake Coils and Industrial AC Brake Coils. These coils are manufactured as per industry standards with the aid of latest automated machines and pristine quality raw materials. Offered coils are widely used in Hydro Extractors, crane brakes, hoist brakes and electrically driven machinery. Our esteemed clients can purchase these AC Brake Coils in both, standard as well as customized options at industry leading prices.

Brake coils are supplied in numbers / sets as per brake models / dimensions.

Features:

• Excellent quality raw materials used
• Precisely engineered
• Easy to install and durable
• Application specific structure

Specifications:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/A
• Port of Dispatch: KANDLA, NAHVA SEVA
• Production Capacity: 10.000/WEEK
• Delivery Time: 1 weeks