Bus Bar System

Product Details:

By utilizing skills of our experienced professionals, we are providing our prestigious clients with a qualitative assortment of Shrouded Bus Bar System. Owing to Features like high efficiency, low maintenance and corrosion resistance, these systems are extensively demanded by our clients. Besides being fabricated using high-grade material, these systems are tested thoroughly on a series of parameters to deliver best possible contentment from our end.

Features:

• Compact design
• Sturdiness
• Highly durable

Specifications:

• Amperage: 60Amp~1200Amp
• GI: 60 A to 125A.
• Aluminium:125A to 500A.
• Copper jointless:25A to 200A.
• Copper:160A to 1200A.
• Length: 4.5 m

Product Details:

Boled joint Shrouded Bus bar system are used for the electrification of mobile equipment. Shrouded Bus bar is a safe, economical and low maintenance way to solve mobile electrification requirement. Systems can be designed to accommodate 60 to 315 amperes. Depending on the application there are various options and accessories that can be custom engineered for your conductor bar system. Portions of the system can be pre-assembled at the factory to help ease installation.

Technical Data Sheet:

• Galvanized Steel Bus bar, Copper Bus bar
• Ampere Capacity : 60A, 100A, 25A, 250A, 315A
• Impedance mill ohm/M : 3.45, 2.76, 1.82, 0.28, 0.33
• DC Resistance Mill ohms/M : 3.42, 2.74, 1.80, 0.27, 0.31
• Standard Conductor Length : 4.5 Mtrs, 4.5 Mtrs

Conductor bar can be found on overhead crane runways, hoists, trolleys, conveyors, port cranes and people movers.

Product Details:

We are manufacturer of Conventional DSL System which generally comprises of Indian Standard Angle (ISA) or Rails, Brackets, Current Collectors Assemblies, Copper Expansion Compensator, Power Feed Clamp, Control Clamp.

The conventional assembly is ideally suited when the current ratings
are beyond 400Amps under normal operation and shall be suited for lower ratings where the environment is dusty.

• Brackets are welded to the web of the girder at 2.0m intervals.
• When the brackets have been fitted, the four conductor rails (three phases and earth) are assembled with proper alignment of all the four conductors. The Current Collector are mounted onto the Crane, which
• is in contact with the Conductor Rail and thus provides power to all
• the Panels of the Crane.

Our Conventional DSL Systems is ideally suited for Steel Plants, Smelters, Power Plants outdoor operating conditions.

Product Details:

We provide Conductor Bar with following features:

Product Details:

Crane Bus bar system are used for the electrification of mobile equipment. We have a comprehensive range of Bright light lite sparkle which is load monitoring system. The bus bar system is manufactured under the strict supervision by highly experience and technically knowledgeable persons and is thoroughly checked before it is dispatched from the factory. Separate conductors shall be provided for each phase.

Specifications:

• Ampere Capacity: 60A, 100A, 125A, 160A, 250A, 400A, 200A, 315A
• Impedance mill ohm/M: 3.45, 2.76, 1.82, 0.32, 0.28, 0.20, 0.30, 0.28
• DC Resistance Mill ohms/M: 3.42, 2.74, 1.80, 0.31, 0.27, 0.19, 0.26, 0.22
• Standard Conductor Length: 4.5 Mtrs, 4.5 Mtrs, 4.5 Mtrs

Product Details:

CMK Electropower Pvt ltd. is the leading manufacturer & exporter of Crane Busbar system.Crane Bus bar system are used for the electrification of mobile equipment. We have a comprehensive range of Bright light lite sparkle which is load monitoring system. The bus bar system is manufactured under the strict supervision by highly experience and technically knowledgeable persons and is thoroughly checked before it is dispatched from the factory. Separate conductors shall be provided for each phase.


Specifications:

• Ampere Capacity: 60A, 100A, 125A, 160A, 250A, 400A, 200A, 315A
• Impedance mill ohm/M: 3.45, 2.76, 1.82, 0.32, 0.28, 0.20, 0.30, 0.28
• DC Resistance Mill ohms/M: 3.42, 2.74, 1.80, 0.31, 0.27, 0.19, 0.26, 0.22
• Standard Conductor Length: 4.5 Mtrs, 4.5 Mtrs, 4.5 Mtrs

Cover with ultra violet additive for outdoor sun locations. High temperature cover (280F) for all conductors. Stainless steel conductors in for corrosive atmospheres. Epoxy coated, stainless steel, and insulated hangers for wet an corrosive atmospheres. Factory built expansion sections and anchors for expansion control. Factory bent curved conductor sections systems. A variety of covers for matching competitive systems. Heated conductor systems for ice prevention on outdoor systems or freezer storage. Totally enclosed covers with flap for air-born contaminants, indoor & outdoor versions. Bare conductors available for extreme heat applications
Special long-wear collector brushes for systems.

Product Details:

Cmk Electropower Pvt Ltd is the leading manufacturer & exporter of Crane Shrouded DSL Busbar system.Shrouded Bus Bar (DSL) system are used for the electrification of mobile equipment. Shrouded bus bar is a safe, economical and low maintenance way to solve mobile electrification requirement. Systems can be designed to accommodate 60 to 1200 amperes. Depending on the application there are various options and accessories that can be custom engineered for your conductor bar system. Portions of the system can be pre-assembled at the factory to help ease installation. Conductor bar can be found on overhead crane runways, hoists, trolleys, conveyors, port crane and people movers.

Cover with ultra violet additive for outdoor sun locations High temperature cover (280F) for all conductors Stainless steel conductors in for corrosive atmospheres Epoxy coated, stainless steel, and insulated hangers for wet an corrosive atmospheres Factory built expansion sections and anchors for expansion control Factory bent curved conductor sections systems A variety of covers for matching competitive systems Heated conductor systems for ice prevention on outdoor systems or freezer storage Totally enclosed covers with flap for air-born contaminants, indoor & outdoor versions Bare conductors available for extreme heat applications Special long-wear collector brushes for systems.

Our products are used in following Industries:

Crane manufacturers, Heavy industries, Steel industries, Metal industries, Indian railways, Public sector undertaking, Automobile industries, Power plants, Docks & ports Exports.

Additional Information:

• Item Code: SL2
• Delivery Time: READY STOCK
• Packaging Details: AS PER REQUIREMENT

Product Details:

We are manufacturer and export curved busbar. Curved enclosed conductor rail are used for electrification of crane, hoist and moving machinery. This system are available 40amp to 200Amp copper. Our system are used in Foundry, Automobile industries, Paper industries, Port and shipyard, rolling mills, and heavy engineering industries

Product Details:

EOT Crane Busbar System are used for the electrification of mobile equipment. Shrouded Bus bar is a safe, economical and low maintenance way to solve mobile electrification requirement. Systems can be designed to accommodate 60 to 400 amperes. Depending on the application there are various options and accessories that can be custom engineered for your conductor bar system. Portions of the system can be per-assembled at the factory to help ease installation.

Specifications:

• Ampere Capacity: 60A, 100A, 125A, 160A, 250A, 400A, 200A, 315A
• Impedance mill ohm/M: 3.45, 2.76, 1.82, 0.32, 0.28, 0.20, 0.30, 0.28
• DC Resistance Mill ohms/M: 3.42, 2.74, 1.80, 0.31, 0.27, 0.19, 0.26, 0.22
• Standard Conductor Length: 4.5 Mtrs

Additional Information:

• Item Code: CMKSL1
• Production Capacity: 10000
• Delivery Time: READY STOCK

Product Details:

The enclosed conductor rail, joint less conductor rails are modern & safe system for energy transmission for various type of equipment such as EOT crane, mobile machinery, bridge crane, conveyor belts, chain conveyors etc

• Rail Length [mm]: 4.000
• Outside-Dimensions of bar profile: 2.20" x 3.54" (56.0 mm x 90,0 mm)
• Support Spacing: 6.56 ft (2 meters)
• Operating Conditions: For indoor and outdoor applications
• Track Configuration: Straight course; curve segments available by request
• Current Range : 40 Amps, 60 Amps, 80 Amps, 100 Amps, 120 Amps, 140 amps, 160 Amps, 180 Amps, 200 Amps
• Maximum Running Speed: 278.9 feet/minute (85 meters/minute)

Electrical properties:

• Max. Voltage(V): 600
• Rail Length [mm]: 4.000
• Conductor cross section(mm2): 10 - 16 - 25 - 35 - 50
• Resistance(Ω /km): 1.656 - 1.137- 0.713 - 0.522 - 0.337
• Leakage resistance: CTI600-2, 7
• Dielectric strength: 30-40KV/mm
• Track Configuration: Straight course / Curve segments on request ( R≥ 1.2m )

Mechanical properties:

• Flexible strength: 75N/mm2± 10%
• Tensile strength: 40N/mm2± 10%

Temperature range:

• Common Housing: -30oC up to +60oC
• Housing: -20oC up to +115oC

Product Details:

CMK Electropower Pvt Ltd. is the Leading supplier of Giovenzana Conductor Rail. The Box type enclosed, joint less conductor rails are modern & safe system for energy transmission for various type of equipments such as EOT crane, mobile machinery, bridge crane, conveyor belts, chain conveyors etc

• Rail Length [mm]: 4.000
• Outside-Dimensions of bar profile: 2.20" x 3.54" (56.0 mm x 90,0 mm)
• Support Spacing: 6.56 ft (2 meters)
• Operating Conditions: For indoor and outdoor applications
• Track Configuration: Straight course; curve segments available by request
• Current Range : 30 Amps,40 Amps, 60 Amps, 80 Amps, 100 Amps, 120 Amps, 140 amps, 160 Amps, 180 Amps, 200 Amps
• Maximum Running Speed: 278.9 feet/minute (85 meters/minute)

Electrical properties:

• Max. Voltage(V): 600
• Rail Length [mm]: 4.000
• Conductor cross section(mm2): 10 - 16 - 25 - 35 - 50
• Resistance(Ω /km): 1.656 - 1.137- 0.713 - 0.522 - 0.337
• Leakage resistance: CTI600-2, 7
• Dielectric strength: 30-40KV/mm
• Track Configuration: Straight course / Curve segments on request ( R≥ 1.2m )

Mechanical properties:

• Flexible strength: 75N/mm2± 10%
• Tensile strength: 40N/mm2± 10%

Temperature range:

• Common Housing: -30oC up to +60oC
• BAYBLEND Housing: -20oC up to +115oC

Feature:

• Power/Voltage 600 V
• Size 4.0 mm
• Application Used as crane part

Additional Information:

• Item Code: TR60
• Production Capacity: 1000
• Delivery Time: READY STOCK

Product Details:

Giovenzana Conductor Rail.The Box type enclosed, joint less conductor rails are modern & safe system for energy transmission for various type of equipments such as EOT crane, mobile machinery, bridge crane, conveyor belts, chain conveyors etc

Features:

• Rail Length [mm]: 4.000
• Outside-Dimensions of bar profile: 2.20" x 3.54" (56.0 mm x 90,0 mm)
• Support Spacing: 6.56 ft (2 meters)
• Operating Conditions: For indoor and outdoor applications
• Track Configuration: Straight course; curve segments available by request
• Current Range : 30 Amps,40 Amps, 60 Amps, 80 Amps, 100 Amps, 120 Amps, 140 amps, 160 Amps, 180 Amps, 200 Amps
• Maximum Running Speed: 278.9 feet/minute (85 meters/minute)

Length 4 mtr

Product Details:

CMK Electropower Pvt ltd. is the leading manufacturer & exporter of Crane Busbar system.Crane Bus bar system are used for the electrification of mobile equipment. We have a comprehensive range of Bright light lite sparkle which is load monitoring system. The bus bar system is manufactured under the strict supervision by highly experience and technically knowledgeable persons and is thoroughly checked before it is dispatched from the factory. Separate conductors shall be provided for each phase.

Specifications:

• Ampere Capacity: 60A, 100A, 125A, 160A, 250A, 400A, 200A, 315A
• Impedance mill ohm/M: 3.45, 2.76, 1.82, 0.32, 0.28, 0.20, 0.30, 0.28
• DC Resistance Mill ohms/M: 3.42, 2.74, 1.80, 0.31, 0.27, 0.19, 0.26, 0.22
• Standard Conductor Length: 4.5 Mtrs, 4.5 Mtrs, 4.5 Mtrs

Cover with ultra violet additive for outdoor sun locations, High temperature cover (280F) for all conductors, Stainless steel conductors in for corrosive atmospheres. Epoxy coated, stainless steel and insulated hangers for wet an corrosive atmospheres. Factory built expansion sections and anchors for expansion control, Factory bent curved conductor sections systems. A variety of covers for matching competitive systems. Heated conductor systems for ice prevention on outdoor systems or freezer storage. Totally enclosed covers with flap for air-born contaminants. indoor & outdoor versions. Bare conductors available for extreme heat applications. Special long-wear collector brushes for systems.

Product Details:

We are the leading supplier of PIN TYPE BUSBAR made available to our clients at competitive prices.

WE DEALS IN PIN TYPE BUSBARMATERIAL AVAILABLE IN GI,COPPER
1 MM THICKNESS

Additional Information:

• Item Code: CMK-SL1
• Production Capacity: 10000
• Delivery Time: READY STOCK

Product Details:

We provide with following features:

Product Details:

Cmk Electropower Pvt Ltd is the leading manufacturer & exporter of Shrouded Bus bar system are used for the electrification of mobile equipment. Shrouded Bus bar is a s afe, economical and low maintenance way to solve mobile electrification requirement.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: NAVA SHEVA
• Production Capacity: 1000MTR
• Delivery Time: READY STOCK
• Packaging Details: AS PER CUSTOMER REQUIREMENT

Product Details:

Shrouded Bus Bar (DSL) system are used for the electrification of mobile equipment. Shrouded bus bar is a safe, economical and low maintenance way to solve mobile electrification requirement. Systems can be designed to accommodate 60 to 1200 amperes. Depending on the application there are various options and accessories that can be custom engineered for your conductor bar system. Portions of the system can be pre-assembled at the factory to help ease installation. Conductor bar can be found on overhead crane runways, hoists, trolleys, conveyors, port crane and people movers.

• Cover with ultra violet additive for outdoor sun locations
• High temperature cover (280F) for all conductors
• Stainless steel conductors in for corrosive atmospheres
• Epoxy coated, stainless steel, and insulated hangers for wet an corrosive atmospheres
• Factory built expansion sections and anchors for expansion control
• Factory bent curved conductor sections systems
• A variety of covers for matching competitive systems
• Heated conductor systems for ice prevention on outdoor systems or freezer storage
• Totally enclosed covers with flap for air-born contaminants, indoor & outdoor versions
• Bare conductors available for extreme heat applications
• Special long-wear collector brushes for systems.

 

Our products are used in following Industries:

• Crane manufacturers
• Heavy industries
• Steel industries
• Metal industries
• Indian railways
• Public sector undertaking
• Automobile industries
• Power plants
• Docks & ports
• Exports

Make/Brand Cmk Electropower Pvt Ltd

Material Gi, Copper And Aluminium

Product Details:

The enclosed conductor rail, joint less conductor rails are modern & safe system for energy transmission for various type of equipment such as EOT crane, mobile machinery, bridge crane, conveyor belts, chain conveyors etc

• Rail Length [mm]: 4.000
• Outside-Dimensions of bar profile: 2.20" x 3.54" (56.0 mm x 90,0 mm)
• Support Spacing: 6.56 ft (2 meters)
• Operating Conditions: For indoor and outdoor applications
• Track Configuration: Straight course; curve segments available by request
• Current Range : 40 Amps, 60 Amps, 80 Amps, 100 Amps, 120 Amps, 140 amps, 160 Amps, 180 Amps, 200 Amps
• Maximum Running Speed: 278.9 feet/minute (85 meters/minute)

Electrical properties:

• Max. Voltage(V): 600
• Rail Length [mm]: 4.000
• Conductor cross section(mm2): 10 - 16 - 25 - 35 - 50
• Resistance(Ω /km): 1.656 - 1.137- 0.713 - 0.522 - 0.337
• Leakage resistance: CTI600-2, 7
• Dielectric strength: 30-40KV/mm
• Track Configuration: Straight course / Curve segments on request ( R≥ 1.2m )

Mechanical properties:

• Flexible strength: 75N/mm2± 10%
• Tensile strength: 40N/mm2± 10%

Temperature range:

• Common Housing: -30oC up to +60oC
• Housing: -20oC up to +115oC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/A
• Port of Dispatch: KANDLA , NAHVA SEVA
• Production Capacity: 10.000/WEEK

Product Details:

CMK Electro Power Pvt ltd. is the Manufacturer of Heavy Conductor Bus bar system.Heavy Conductor Bus bar system are used for the electrification of mobile equipment. Shrouded Bus bar is a safe, economical and low maintenance way to solve mobile electrification requirement. Systems can be designed to accommodate 60 to 1200 amperes. Depending on the application there are various options and accessories that can be custom engineered for your conductor bar system. Portions of the system can be pre-assembled at the factory to help ease installation. Conductor bar can be found on overhead crane runways, hoists, trolleys, conveyors, port cranes and people movers. Cover with ultra violet additive for outdoor sun locations High temperature cover (280F) for all conductors Stainless steel conductors in for corrosive atmospheres Epoxy coated, stainless steel, and insulated hangers for wet an corrosive atmospheres Factory built expansion sections and anchors for expansion control Factory bent curved conductor sections systems A variety of covers for matching competitive systems Heated conductor systems for ice prevention on outdoor systems or freezer storage Totally enclosed covers with flap for air-born contaminants, indoor & outdoor versions Bare conductors available for extreme heat applications Special long-wear collector brushes for systems

Product Details:

DSL Conductor bar - track are super finished and cross section is maintained to achieve required ampere. The material for track is Aluminum. Conductors shall be accurately aligned to ensure positive electrical contact between the collector and the conductor. Separate conductors shall be provided for each phase. Insulation cover shall be rigid PVC. Range of Ampere available with the material of Aluminium.

• Aluminium : 200 Amp. to 350 Amp.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/A
• Port of Dispatch: KANDLA , NAHVA SEVA
• Production Capacity: 10.000/WEEK
• Delivery Time: 1 week

Product Details:

Bolt joint Shrouded Bus bar system are used for the electrification of mobile equipment. are super finished and cross section is maintained to achieve required ampere. The material for track is Copper Conductors shall be accurately aligned to ensure positive electrical contact between the collector and the conductor. Separate conductors shall be provided for each phase. Insulation cover shall be rigid PVC, self extinguishing, with a heat distortion point of 70ºC at 260psi. This is a part of EOT crane and crane components.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/A
• Port of Dispatch: KANDLA , NAHVA SEVA
• Production Capacity: 10.000/WEEK
• Delivery Time: 1 week

Product Details:

The enclosed conductor rail, joint less conductor rails are modern & safe system for energy transmission for various type of equipment such as EOT crane, mobile machinery, bridge crane, conveyor belts, chain conveyors etc

• Rail Length [mm]: 4.000
• Outside-Dimensions of bar profile: 2.20" x 3.54" (56.0 mm x 90,0 mm)
• Support Spacing: 6.56 ft (2 meters)
• Operating Conditions: For indoor and outdoor applications
• Track Configuration: Straight course; curve segments available by request
• Current Range : 40 Amps, 60 Amps, 80 Amps, 100 Amps, 120 Amps, 140 amps, 160 Amps, 180 Amps, 200 Amps
• Maximum Running Speed: 278.9 feet/minute (85 meters/minute)

Electrical properties:

• Max. Voltage(V): 600
• Rail Length [mm]: 4.000
• Conductor cross section(mm2): 10 - 16 - 25 - 35 - 50
• Resistance(Ω /km): 1.656 - 1.137- 0.713 - 0.522 - 0.337
• Leakage resistance: CTI600-2, 7
• Dielectric strength: 30-40KV/mm
• Track Configuration: Straight course / Curve segments on request ( R≥ 1.2m )

Mechanical properties:

• Flexible strength: 75N/mm2± 10%
• Tensile strength: 40N/mm2± 10%

Temperature range:

• Common Housing: -30oC up to +60oC
• Housing: -20oC up to +115oC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/A
• Port of Dispatch: KANDLA , NAHVA SEVA
• Production Capacity: 10.000/WEEK

Product Details:

The Box type enclosed, joint less conductor rails are modern & safe system for energy transmission for various type of equipments such as EOT cranes, mobile machinery, bridge cranes, conveyor belts, chain conveyors etc

• Rail Length [mm]: 4.000
• Outside-Dimensions of bar profile: 2.20" x 3.54" (56.0 mm x 90,0 mm)
• Support Spacing: 6.56 ft (2 meters)
• Operating Conditions: For indoor and outdoor applications
• Track Configuration: Straight course; curve segments available by request
• Current Range : 40 Amps, 60 Amps, 80 Amps, 100 Amps, 120 Amps, 140 amps, 160 Amps, 180 Amps, 200 Amps
• Maximum Running Speed: 278.9 feet/minute (85 meters/minute)

Electrical properties:

• Max. Voltage(V): 600
• Rail Length [mm]: 4.000
• Conductor cross section(mm2): 10 - 16 - 25 - 35 - 50
• Resistance(Ω /km): 1.656 - 1.137- 0.713 - 0.522 - 0.337
• Leakage resistance: CTI600-2, 7
• Dielectric strength: 30-40KV/mm
• Track Configuration: Straight course / Curve segments on request ( R≥ 1.2m )

Mechanical properties:

• Flexible strength: 75N/mm2± 10%
• Tensile strength: 40N/mm2± 10%

Temperature range:

• Common Housing: -30oC up to +60oC
• BAYBLEND Housing: -20oC up to +115oC