|Model||ACC03 and ACC10|
|Alarm Signal||10 meters|
|Sensors at Distance||3 meter|
|Measuring Range||1 to 10 mtrs|
Anti Collision System is designed to prevent crane_to crane_to object collisions running on the same rails. The reflex system features a two channel infrared sensors at distance from 3 meter to 10 meters and can be used with all types of adjustable frequency drives and stepped controls. The anti collision System is designed to avoid the collision of two adjacent cranes_in the same bay running on the same rails. This system when installed on the two adjacent cranes_will avoid the collision of two cranes_. The system works on the principle of retro -reflective infrared waves. It consists of an emitter and sensor module and a special reflector. The emitter emits the infrared waves in the direction of the reflector. The reflector reflects these infrared waves back to the sensor. The sensor senses the presence of these reflected infrared waves and activates an alarm signal and stops / reduces the speed of the _crane . Thus if the two _cranes are away from each other then the reflected waves will not reach the sensor and the cranes_operate normally. The distance between the reflector and the sensor to detect the presence of infrared waves can be adjusted with the help of the potentiometer provided on the system. The maximum distances between the two cranes_to generate the alarm signal can be maximum 10 meters. The anti collision system is specially designed for the Crane_ application and is suitable for the continuous duty. Each system consists of an Emitter/sensor module and a reflector. The emitter/ sensor module is installed on one crane_ and the corresponding reflector is installed on the opposite _crane. Hence to avoid the collision between two adjacent cranes_ two sets of each emitter/sensor module and reflectors are required.
|Minimum Order Quantity||1 Piece|
We are manufacturer of Anti collision device.
Your overhead equipment is too valuable to your operation to take chances. Our Anti colision device will protect crane and hoists from contact with other equipment or end walls.
Using Retroreflective Class 1 Laser technology, the simple push-button set up permits you to program your system to activate the Alarm output and Stop functions at exactly the distance you require. With a range of10 meters.
Anti Collision device protects stationary equipment, too. Its warning Alarm output will be activated if the unit detects a target moving within its set warning distance. That gives your operators time to take corrective action before a costly collision occurs.
1. When the two cranes are out of the range of the anti collision device the relay contact while on LED will remain ON.
2. Keep the Required Distance between the two cranes at which the cranes will stop. Rotate the Potentiometer to adjust the Range.
3. Clockwise Rotation of this Pot increases the range whereas anticlockwise rotation Decreases it.